Concrete Services
Concrete Driveways
Design, construction, colour & stencil patterns
Concrete House Slabs
Poured to engineer's plans, level and true
Concrete Shed Slabs
Sheds, garages, carports & entertaining areas
Concrete Resurfacing
A new decorative surface over sound concrete
Stamped Concrete
Stone, slate, tile and timber profiles
Stencil Concrete
Crisp paver, brick and tile grout lines
Concrete Pool Surrounds
Slip-resistant and cool underfoot
Finishes & more
Free quote
0404 859 045Concrete Finishes
Colours & patterns
Free quote
0404 859 045
Concrete driveway design and construction. A complete range of colours, stencil patterns and coatings available — giving your driveway a unique finish that complements your home.
In short
Sunshine Coast Concrete Services designs and builds concrete driveways across the Sunshine Coast, QLD. A driveway is excavated, formed, reinforced with mesh sized to its load, poured, then finished in plain grey, oxide colour, stencil or stamped pattern and sealed. A typical residential driveway takes two to four days on site plus curing. On-site quotes are free.
Related: when you can drive on new concrete · how thick a driveway should be · compare driveway finishes
01 — Overview
Your driveway is the first thing anyone sees. We set out, form up, pour and finish driveways right across the Sunshine Coast — from a straight single strip to a curved double with a turning circle. Every job is excavated and prepared properly, reinforced to suit the loads it will carry, and finished in the colour and pattern you choose.
Not sure whether to go plain, stencilled or stamped? We'll bring the colour chart and pattern samples to the quote so you can see the options against your own house before you commit to anything.
Talk to a concreterLevels checked, spoil removed and the base compacted before a single form goes down.
Formed to your lines and reinforced with mesh sized to the job — residential or heavy vehicle.
Plain grey, oxide colour, stencil or stamp, across the full range of pattern options.
Finished with a protective seal, plus straight advice on curing times and cleaning.
Colour & pattern
Stencil driveway with a diamond feature inlay. We bring the physical colour chart and pattern samples to every quote, so you can hold the finish up against your home instead of guessing from a screen.
View colours & patternsHow a job runs
STEP 01
Tell us what you’re picturing. We’ll talk products, access and rough numbers on the phone.
STEP 02
We measure up on site, confirm the finish and send a clear written quote. Free, no obligation.
STEP 03
Excavation, formwork, mesh and pour — done by the crew who quoted it, site kept tidy.
STEP 04
Colour, stencil or stamp applied, then sealed — plus straight advice on curing and care.
Most residential driveways take 2 to 4 days on site across preparation, pour and finishing. Light vehicles can usually drive on it after about 7 days, and the concrete reaches its design strength at around 28 days. See curing & care.
A driveway for cars is commonly 100 mm thick with steel reinforcing mesh on a compacted base. Driveways for caravans, boats or trucks need more thickness and heavier reinforcement. Your quote states the spec for your job — see the driveway thickness guide.
Work on your own land usually does not, but the crossover between your boundary and the road sits in the road reserve and is controlled by Sunshine Coast Council. Check the council’s current requirements before work starts; we can talk you through it at the quote.
The price depends on location, the finish you choose and site access, along with the area, whether an old driveway has to come out and how much preparation the ground needs. We measure up on site and give you a free written quote.
Free quote
No obligation, no pressure. Call and you’ll get a concreter, not a call centre — or send the details through and we’ll come back to you.
